Resources · Data sheets

Product data sheets

Data sheets and safety data sheets for the flooring and coatings systems we install, for submittals and specs. Each link opens the manufacturer’s current document.

Polished concrete

9 products
Ameripolish3D HS Densifier
Hybrid silicate densifier
Ameripolish3D HSL Densifier
Low-solids hybrid silicate densifier for tight floors
Ameripolish3D SF Densifier
Silicate-free densifier
Ameripolish3D SP
Stain protector and color enhancer
CurecreteAshford Formula
Sodium silicate cure, densifier, and hardener
Euclid ChemicalEuco Diamond Hard
Silicate and siliconate densifier and sealer
LATICRETEL&M FGS Hardener Plus
Hardener for polished concrete
PROSOCOConsolideck LS
Lithium silicate densifier
PROSOCOConsolideck LSGuard
Protective treatment for polished concrete

Stains and dyes

3 products
AmeripolishConcrete Dyes
Classic, SureLock, and Dye-N-Seal dyes for polished concrete
KemikoStone Tone Concrete Stain
Reactive acid stain
SCOFIELDLITHOCHROME Chemstain Classic
Reactive acid stain

Overlays

3 products
Rapid SetTRU PC
Polished concrete finish topping
Rapid SetTRU SP
Salt and pepper self-leveling topping
Rapid SetTRU Self-Leveling
Polishable self-leveling topping

Joint fillers

2 products
HTSHTS-PE85
Polyurea joint filler
Metzger/McGuireSpal-Pro RS 88
Rapid-setting polyurea joint filler

Wall stains

1 product
KEIMConcretal Stain (Concretal-Lasur)
Mineral silicate stain for concrete

No matching products. Email estimating@allccs.com and we will send the data sheet.

Joint filler calculator

Estimate how much joint filler a floor needs. Enter the joint size and either the total linear feet or the floor size and joint spacing.

0
Gallons of mixed filler
Linear feet0
Linear feet per gallon0
Each part, 1:1 two-part filler0 gal
Volume0 cu in

An estimate only: 1 gallon equals 231 cubic inches. Actual use varies with joint condition, spalls, and how the joint is prepared. Check the manufacturer’s requirements for fill depth and timing, such as the Metzger/McGuire coverage chart, or send us the plans and we will include joint filling in the bid.

Submittals

Need a full submittal package?

Product data, SDS, warranties, and color charts for your project, assembled and sent together. Tell us the project and the spec sections.

Documents belong to their manufacturers. Always confirm you have the current revision before submitting. Listing a product means we work with it, not that AllStar is a manufacturer-approved or certified installer, or that the manufacturer endorses AllStar.