Back to Results

Concrete Polishing – Bee Cave, TX

Service: Concrete Resurfacing, Concrete Sealing, Epoxy Floor, Joint Filling, Polished Concrete, Resin Flooring, Stained Concrete, Surface Preparation

AllStar Concrete Coatings was contracted to remove an existing epoxy coating that had failed and was delaminating throughout the commercial flooring.  AllStar came up with a plan to scrape the existing floor off before grinding to keep aggregate exposure to a minimum. This concrete floor then receives a polished concrete polishing process from 50 grit through 800 grit, along with densifier and sealer application.

Schedule Consultation

 

Concrete Polishing Bee Cave Project Goals & Outcomes

The business owner contacted AllStar when trying to find a concrete grinding and polishing company in the Bee Cave, TX area.  After the initial walk-through and consultation, Allstar was hired to complete the kitchen concrete polishing Bee Cave area for the owners. A concrete grinder and polisher were used as the large equipment for this concrete polishing project. After the initial grinding stages, the concrete flooring was polished from 50 through 100 grit stages, The project area was then thoroughly cleaned and densified to harden and dustproof the commercial flooring. Allstar then proceeded with the concrete polishing steps from 400- 800 grit as a final diamond polish. A penetrating stain guard was then applied before a final buffing was complete. The result was the polished concrete floor seen above in the pics.

The customer’s priorities were:

• Efficiency and the ability to meet a deadline
• Epoxy removal
• An overall appealing look and sheen of the finished product
• A surface that was smooth and easy to clean

Once the concrete polishing project was turned over, the owners and general contractor were pleased with the outcome of the end result. Not only was the concrete floor beautiful and easy to clean, but also the maintenance over time was significantly less than some other commercial flooring alternatives.