Back to Results

Concrete Grinding – Waco, TX

Service: Concrete Resurfacing, Concrete Sealing, Epoxy Floor, Joint Filling, Polished Concrete, Resin Flooring, Stained Concrete, Surface Preparation

Concrete Grinding Contractor

This commercial business was looking for a concrete grinding contractor in Waco, TX  as they were having issues with the existing coating failing due to surface delamination. After talking with the owner about final expectations, AllStar Concrete Coatings was called in to see if we could help with the surface preparation and grinding of the concrete back to a clean concrete slab. The coating was extremely brittle in some areas and sound in others, so we decided to grind the entire floor to remove the loose material and get everything to a consistent texture. The floor had to then be ground smooth with numerous grinding passes to achieve uniformity and to meet the client’s needs. The owner opted out of the sealing concrete as a final finish to prevent dusting and help with staining in the future.

Schedule Consultation

 

Concrete Grinding Waco – Project Goals & Outcomes

The business owner contacted AllStar to provide concrete grinding in Waco to remove loose material and grind smooth on 12,000 square feet on the existing exterior concrete slab. The concrete floor needed to be cleaned of all previous sport court that was failing and having flaking issues before the area of the structure could be used, and the end product could be safe for their customers. The project owner was on a tight timeline due to business hours, and Allstar was able to meet their deadline and exceed their expectations.

The client wanted:

  • Efficiency and an ability to meet a tight deadline
  • Failed sport court removed
  • An overall appealing look and consistent look of the finished product
  • A structurally sound  area from concrete grinding Waco
  • A safe and usable surface

Once the project was complete, both the owner’s representatives and themselves were very pleased to see the coating delamination issue had been resolved. Not only was the floor consistent with no more flaking, but the owner could also continue using the area with no worries of safety issues or delay which cost them time and money on this project.