Case study · Large exposed aggregate polished concrete
Odessa High School
Location
Odessa, TX · 2014
Area
80,000 sq ft
Exposure
Large exposed aggregate
Overview
Case study
Another contractor’s mock-up could not deliver the exposed aggregate look the owner wanted. We were brought in to recover an 80,000 square foot floor and the lost schedule with it.
Large exposed aggregate, polished to a high sheen
01
The challenge
A failed mock-up and a lost schedule
The general contractor had another polishing contractor run a mock-up on an 80,000 square foot exposed aggregate floor. They could not get the aggregate large or consistent enough, and the result did not meet the owner’s standards. The project team had lost time and needed the floor back on track.
02
Our approach
12 to 14 passes before the polishing even started
The aggregate in this slab was extremely hard. We made 12 to 14 passes with the initial grit just to bring the stone to a consistent texture, then grouted the floor several times to fill pinholes and voids before polishing it to a high sheen.
03
The result
The floor the architects originally designed
We met the deadline, and the owner’s representatives and architects got the exposed aggregate floor they had wanted from the start. It is easy to clean and will cost far less to maintain over time than most other flooring. We later came back to install 10,000 square feet of epoxy flake in the school colors in the locker rooms.
In numbers
80,000
Square feet
12–14
Initial grit passes
10,000
SF of epoxy flake in the locker rooms
On time
After a lost schedule
Project data
System
Exposed aggregate polished concrete
Finish
Large exposed aggregate, high sheen
Prep
Multiple grout passes for pinholes and voids
Scope
Recovery after a failed mock-up
Location
Odessa, TX
Gallery
Swipe or scroll →
Next project
Round Rock tilt-wall coatings →
Need a floor recovered on a deadline?
Send the plans, finish schedule, and spec sections. We review the scope, including phasing, and get you a complete number.